Hi-Q Tools plastic


  • degree of protection: IP60
  • charging current up to 750 mA – suitable for batteries up to 30 Ah
  • input voltage 100 V-240 V AC, 50-60 Hz, maximum consumption 20 watts
  • extra-long connection cable
  • X-Connect socket
Tuotetunnus (SKU): 50020000910 Osastot: , , , Avainsana tuotteelle


Hi-Q Tools Battery Charger PM750 Canbus, 6 /12 V 750 mA, for lead-acid batteries

Small CANBUS-capable battery charger for 6- and 12-V lead-acid batteries (WET, MF, AGM and gel).
You can use this charger to recharge the battery when needed or leave it on for extended periods of time (for example, over winter), thus extending battery life.
Particularly suitable for smaller batteries, also in vintage cars, passenger cars, jet skis, lawnmowers, snowmobiles, etc.


  • automatically detects if a 12- or 6-volt battery is connected after turning it on through the Mode button
  • checks the charging status of the battery and automatically starts the optimal charging process or the freshness-keeping mode
  • built-in battery desulfator to restore used batteries. It can also reactivate undamaged, discharged batteries
  • on most models with CANBUS, also suitable for connection to the original on-board plug socket (for example, for BMW, Ducati, Triumph and Harley-Davidson) – you may need a suitable adapter (see options)
  • from plugging it in and forgetting to use the vehicle – the charger does all there is in between
  • includes removable crocodile clips which are attached to eyelets that can also be screwed directly to the battery terminals alternatively
  • this is particularly functional if the battery is difficult to reach for
  • the connection to the charger is made through an X-Connect plug – this also allows the connection of further accessories (see options)
  • if the X-Connect socket is screwed firmly to the battery, it can be closed with a rubber cover
  • the power plug is integrated in the charger itself. In combination with the extra-long connection cable, the casing doesn’t get in the way
  • input voltage 100 V-240 V AC, 50-60 Hz, maximum consumption 20 watts
  • charging current up to 750 mA – suitable for batteries up to 30 Ah
  • degree of protection: IP60

Dimensions (approx.):
Length x width x height (without plug) Housing: 113 x 69 x 34 mm
Wide crocodile clips metal/plastic: 12/15 mm
Cable length device to X-Connect plug: 320 cm
Cable length Connect plug to battery connection grommets: 56 cm
Cable length Connect plug to tip crocodile clips: 64 cm
Ø eyelet: 6.5 mm (M6)
Weight: 380 g


  • additional battery connection cable with X-Connect socket and crocodile clips as already included in the delivery for other vehicles (order number 50020000920)
  • battery connection cable with X-Connect socket and integrated LED charging status indicator (order number 50020000921)
  • adapter for charging via existing DIN power sockets (eg., BMW) or cigarette lighter socket with X-Connect socket (order number 50020000923)
  • extension cable with X-Connect plug and socket (order number 50020000922)
  • ATTENTION:the separate X-Connect accessory is only available from April 2019!
  • charging status display via app on smartphone or tablet (order number 50020000570)
  • cable distribution set if there are already too many connections directly to the battery or if their poles are of difficult access (order number 50220000550)Price per item
  • https://www.youtube.com/watch?v=6IHpiBzjJj8