Hashiru Unisex

6.06

  • installed between the indicators and the bike’s wiring loom
  • controls the flash frequency of LED indicators if the original indicators are 10 W or 21 W
  • one resistor must be installed for each indicator
Share

Hashiru resistance in cable for LED indicators

Resistor for reducing the flash frequency of LED indicators to the permitted rate if the original indicators are 21 W or 10 W.

Including an adaptor cable with a round connector and sleeves to be installed between the indicators and the bike’s wiring loom.

One resistor must be installed for each indicator.

Note: There are a few vehicles for which the installation of these resistors is not sufficient. Here it is also necessary to install a load-independent indicator relay (e.g. order no. 50220000220).