Kuvaus
Hashiru grip rubber pair with aluminium ends 06 closed
Universal grip rubbers with aluminium ends on the inside and the outside.
Details:
- comfortable grip rubbers even though not too soft
- very grippy and yet with a lot of Feedback – does not decouple so much
- closed ends – for the assembly of handlebar ends, handlebar end mirrors, handlebar end indicators, hand guards, etc. but if necessary, the caps can be unscrewed and you can cut the rubber open on your own
- replace the original grip rubbers in a simple exchange
- suitable for almost all models with a throttle grip and handlebar with an 22 mm or 25.4 mm outside diameter on the handles
- without accelerator cable intake – the original rotating sleeve is still used – the handle with the bigger inner-Ø diameter is for the gas side
Dimensions (approx.):
for 22 mm handlebars (7/8″)
Length: 133 mm
Width Grip area: 107 mm
Outside-Ø Grip area: 36 mm
Outside-Ø Inside/Outside: 40/36 mm
Weight: .. g
for 25,4 mm handelbars (1″)
Length: .. mm
Width Grip area: .. mm
Outside-Ø Grip area: .. mm
Outside-Ø Inside/Outside: .. mm
Weight: .. g
Approval:
Grip rubbers do not have to be approved; therefore, they do not require any test marks, certificates or ABEs.
Price per pair for both sides of the handlebar